DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor

DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor Review

DEWALT D55153 15 Amp 1-Horsepower 4 Gallon Oiled Twin Hot Dog Compressor Feature

• 4.0 CFM delivered at 90 PSI to provide rapid recovery
• Oil-lubricated pump improves durability
• Cast-iron cylinder enhances pump life
• High-flow regulator for increased performance
• Four-gallon twin-stack tank design with proven acceptance in the market

The DEWALT D55153 Hot Dog Compressor has all the power of a large compressor, but constructed as a smaller, lighter unit. It delivers 3.8 cubic feet per minute at 100 psi and is durably built with oil-lubricated cast-iron cylinder. Included with the Hot Dog Compressor is the regulator and an initial fill of DEWALT synthetic air compressor oil.

Powermate PL1581109 11-Gallon Invector Vertical Air Compressor

Powermate PL1581109 11-Gallon Invector Vertical Air Compressor Review

Powermate PL1581109 11-Gallon Invector Vertical Air Compressor Feature

• Oil free, low maintenance operation
• Circuit breaker friendly motor
• Compact shroud design with fully integrated regulator, gauges, air outlet, large on/off switch, tool holders and tool tray
• Compact 11-Gallon vertical portable tank saves space yet remains portable
• Maximum pressure: 125 PSI; CFM at 90 PSI: 4.0; CFM at 40 PSI: 6.0; RHP: 1.5; UL and CSA certified

Oil Free, Low Maintenance Operation No oil to add or change Easy cold weather startin...

Senco PC1130 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon

Senco PC1130 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon Review

Senco PC1130 Compressor, 1.5-Horsepower (PEAK) 2.5-Gallon Feature

• Direct Drive Motor
• Cast Iron Sleeve / Cast Iron Head Cylinder
• Oil-Splash Lubrication
• Standard equipment includes 1/4" universal coupler regulator, pressure gauge.
• Delivers 2.4 cfm at 100psi

Featuring a slim and quiet design, the Senco PC1130 1.5 HP 2.5-Gallon Compressor is ideal for both contractors and remodelers. If you require the durability of an oil-lubricated compressor but need a lightweight unit for finish and trim applications, this ultra-efficient model will fit the bill. For added convenience, the PC1130 arrives with a 1/4-inch universal coupler, regulator, and pressure gauge.

The Senco PC1130 1.5 HP 2.5-Gallon Compressor: Features a 1.5 HP induction motor. Is constructed of cast iron for durability. Includes a quarter-inch universal coupler, regulator, and pressure gauge.

Tough, cast-iron construction keeps the PC1130 running even after serious job conditions. View larger.

Compact and Powerful
This compact powerhouse gets the job done without getting in the way of your work space or materials. Measuring 20.5 x 18.5 inches (WxH) and weighing just under 40 pounds, the PC1130 offers 2.5 gallons of tank storage, 125 PSI of maximum pressure, and an ultra-fast pump-up time of 39 seconds. It also delivers an impressive 2.4 cfm at 100 PSI.

Durable Construction for Longer Life
Durable and built to last, the PC1130 features both a sleeve and head cylinder made of rough and tough cast iron to resist wear and tear, even under serious job conditions. Oil-splash lubrication ensures consistency, but this compressor boasts a lower operating noise than other oil-lubricated models, making it more pleasant to work with inside the home.

About Senco
For over 50 years, Senco Products, Inc. has provided high-quality products to make it easier for both professionals and remodelers to complete a wide variety of renovation, construction, and industry work. Based in Cincinnati, Ohio, with distributors worldwide, Senco is one of the leading manufacturers of pneumatic and powered fastening systems, as well as the fasteners they drive. Their tools boast superior workmanship and are used in a variety of industries, including home construction and remodeling, cabinet and furniture assembly, manufactured housing and industrial packaging.

What's in the Box
PC1130 1.5 HP 2.5-Gallon Compressor, 1/4-inch universal coupler, regulator, and pressure gauge.
2.5 gallon, 1.5 HP, hand carry, compact and lightweight compressor. Direct drive motor/pump for efficient operation. Aluminum cylinder with steel sleeve for longer life. Cast aluminum pump for less weight and superior heat dissipation. Portable hot dog tank. 2.5 gallon. Includes: 1/4'' universal coupler, regulator, pressure gauge, and compressor oil. Weight: 39 lb. CFM (40 P.S.I.): 3.5. CFM (100 P.S.I.): 3.4. .

Pro-Force VPF1080318 3-Gallon Oil Free Air Compressor with Kit

Pro-Force VPF1080318 3-Gallon Oil Free Air Compressor with Kit Review

Pro-Force VPF1080318 3-Gallon Oil Free Air Compressor with Kit Feature

• Oil free, low maintenance operation
• Equipped with pressure regulator, pressure gauge, quick connect air outlet, on/off switch and built in-handle for easy lifting
• 3-Gallon tank is lightweight and portable, goes most anywhere
• Includes extra value kit - 25-Feet recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler,1/4-Inch NPT male and female thread connectors and thread sealant
• Maximum pressure: 125 PSI; CFM at 90 PSI: 2.0; CFM at 40 PSI: 3.0; RHP: 1.0; UL and CSA certified

Powermate VPF1080318 Features: -Construction material: Steel. -Oil free, low maintenance operation. -Equipped with pressure regulator, pressure gauges, quick connect air outlet and on / off switch. -Tank is lightweight and portable, goes most anywhere. -Built-in handle for easy lifting. -Rubber feet stabilize compressor. -Includes extra value kit: 300" recoil air hose, blow gun with safety nozzle, inflation needle and adapter fitting, dual tire chuck, quick coupler, 1/4" NPT male and female thread connectors and thread sealant. -Fully assembled, ready to use. -UL and CSA Certified. Specifications: -Capacity: 3 Gallon. -Maximum pressure: 125 PSI. -RHP: 1.0. -CFM @ 40 PSI: 3.0. -CFM @ 90 PSI: 2.0. -Voltage: 120V. -Dimensions: 21.5" H x 11" W x 21" D.

Campbell Hausfeld MP6000 Tire Inflator with Gauge

Campbell Hausfeld MP6000 Tire Inflator with Gauge Review

Campbell Hausfeld MP6000 Tire Inflator with Gauge Feature

• Inflation gun, chuck, and gauge are all combined in one easy to use unit
• Clip-on design enables hands-free chuck use
• Built-in relief valve for reducing pressure in over-inflated tires
• Includes flexible hose for easier use
• Gauge has range of 10-150 psi

Keep your tires properly inflated with the Campbell Hausfeld MP6000 Tire Inflator with Gauge. The MP6000 combines an inflation gun, chuck, and gauge in one easy-to-use tool, and it comes with a flexible hose for easy use. This handy gadget can help increase the life of your tires, saving you both time and money.

This combination inflation gun, chuck, and gauge makes quick work of inflation jobs, helping extend the life of your tires.

The MP6000 Tire Inflator with Gauge At a Glance: Inflation gun, chuck, and gauge in one tool Clip-on design for hands-free use Built-in relief valve reduces pressure in over-inflated tires Gauge range of 10 to 150 PSI Includes flexible hose for easy use

Get the Most out of Your Tires
Because routine pressure checks can help extend the life of your tires, investing in a tool like the MP6000 is a smart choice. Not only will the MP6000 help you save time and money, but it will also help protect the environment by optimizing your gas mileage, and it will even help make your vehicle safer to drive.

The MP6000 combines three different tools in one compact design: an inflation gun, chuck, and gauge, which has a range of 10 to 150 PSI. It clips on for hands-free chuck use, and it features a built-in relief valve for reducing pressure in over-inflated tires.

Incredibly Easy to Use: Just Position, Pull, and Fill
The MP6000 is exceptionally easy to use. Just position the chuck on the tire stem, pull the lever on the chuck, and fill. If you wish to keep a record of the pressure results, the gauge will keep the pressure rating when you remove the chuck from the stem, and then it will clear the reading when you touch the reset button.

About Campbell Hausfeld: Making it Easier to Do it Like a Pro!
Campbell Hausfeld makes it easier for you to finish your projects like a pro. The company's history of creating quality products began in 1836, when it manufactured horse-drawn wagons and agricultural equipment. Today, the company offers a complete line of air compressors, air tools and accessories, inflators, nailers and staplers, paint sprayers, pressure washers, and more. Finish your projects faster and easier with Campbell Hausfeld.

What's in the Box
MP6000 tire inflator with gauge and hose.
Inflation gun, chuck and gauge are combined in one easy-to-use unit for quick and accurate tire inflation. Clip-on design enables hands-free chuck use.

Bostitch CPACK2A Two Tool Compressor Combo Kit

Bostitch CPACK2A Two Tool Compressor Combo Kit Review

Bostitch CPACK2A Two Tool Compressor Combo Kit Feature

• CAP2000P-OF oil free air compressor: 2.8 CFM at 90 PSI with 150 max, large 6-gallon reserve tank, impact-resistant shroud to protect-Gauges, weighs only 38-Pound
• SB-1850BN Brad nailer: adjustable depth guide, tool-free adjustable exhaust and no mar tip. Drives 18-Gauge brads 5/8-Inch to 2-Inch in length
• SB-1664FN Finish nailer featuring quick release nose door, adjustable depth guide, tool-free adjustable exhaust and no mar tip. Drives 16-Gauge straight finish nails 1-1/4-Inch to 2-1/2-Inch in length
• Included Accessories: 1/4-Inch x 25 foot PVC hose with fittings, 1000 2-Inch 16ga finish nails, 1000 1-1/4-Inch 18ga brad nails, tool lubricant, contractor's tool bag

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 2 HP (Peak) 6 Gallon Oil-Free Compressor - U/CAP2000P-OF, 2-in 18-Gauge Brad Nailer - U/SB-1850BN, 2-1/2-in 16-Gauge Finish Nailer - U/SB-1664FN, 1/4-in x 25 ft PVC Hose with Fittings, Tool Lubricant, Contractor's Tool Bag